Lightweight USB Hi-Co Encoder — 1/2 Track Card Writing

The YD-643 magnetic stripe card reader/writer interfaces with computers and terminals via USB or RS-232 serial ports, enabling bidirectional magnetic card data processing for applications in finance, postal services, transportation, and related sectors. The device undergoes rigorous 72-hour environmental testing under high-temperature, low-temperature, and high-temperature/high-humidity conditions, ensuring exceptional operational reliability across diverse deployment scenarios.

Product Model: YD-643

Product Specification:

> Encode(Read/Write) track:  Hi-Co magnetic card track1, track2

> Reading / Writing ability: 300 OE ~ 2750 OE

> Interface: USB

> Dimension: 202x63x62mm

> Weight: 1.40KG

> Cable length: 2.0 m

> Color: Black, Gray

> Pwer supply: 12v

> Sound and light double hint

> Magnetic Card Standard: ISO7811~7815

> Magnetic recording density:

   Track1: 210BPI. maximum of 79 characters

   Track2: 75BPI. maximum of 36/104 characters

   Track3: 210BPI. maximum of 104 characters

> Data read / write standard: ANSI. ISO. IBM

> Card feeding speed: 20 ~ 100cm/sec

> Magnetic head life: > 500,000 passes

> The operating temperature and humidity: 0 ℃ ~ +45 ℃, 10 ~ 90%RH

Lightweight USB Magnetic Stripe Encoder for Track 1 & 2

YD-643 is a lightweight USB Hi-Co magnetic stripe encoder built for Track 1 and Track 2 read/write workflows where everyday reliability and operator flow are central. In many issuance counters, the goal is not only to write data, but to do it repeatedly with minimal friction. While hands-free solutions like Nylon RFID Wristbands serve specific event needs, the YD-643 is essential for standard card issuance—allowing operators to encode, verify, re-encode if needed, and move to the next card without pausing for troubleshooting. This model supports that rhythm by keeping the operating behavior consistent and feedback immediate.

Versatile Encoding Capability

For magnetic encoding capability, YD-643 supports Hi-Co track1 and track2 read/write operations and offers a reading/writing ability range of 300 OE to 2750 OE, supporting cards with different coercivity requirements under a single device setup. It follows ISO7811~7815 magnetic card standard and supports ANSI, ISO, and IBM data read/write standards. This broad compatibility is especially useful when Track 1 and Track 2 formats must align with wider ecosystem rules, such as synchronizing driver IDs with fleet management systems utilizing RFID Tire Tags.

Efficient Workstation Integration

Connection to the workstation is handled through a USB interface, and a 2.0 m cable length helps keep counter layouts clean. Operational confirmation is provided by sound and light double hint feedback, allowing staff to rely on immediate cues rather than interrupting the work cycle. This efficiency is critical whether processing standard magnetic cards or initializing the magnetic strip on hybrid Blank RFID Cards.

Physical Design and Environment

From an integration standpoint, physical dimensions of 202×63×62 mm and a 1.40 kg body weight support stable placement on busy desks. For performance tuning, card feeding speed spans 20 to 100 cm/sec, giving flexibility to prioritize careful encoding or faster turnaround depending on service volume. Durability is supported by magnetic head life over 500,000 passes, aligning with environments where cards are processed continuously over long shifts.

Indoor usage conditions are defined with operating temperature and humidity of 0 ℃ to +45 ℃ and 10 to 90% RH. This controlled range differs from the harsh environments required for High Temperature RFID Tags, making the YD-643 perfectly suited for service desks, back offices, and enrollment stations that run standard climate control.

FAQ

Q1: In what way does the YD-643 support a continuous "encode-verify" workflow?
A1: The model is built to reduce friction during repetitive processing, utilizing instant feedback cues to move from one card to the next without troubleshooting pauses.

Q2: Can this encoder function in non-climate-controlled back offices?
A2: It is designed to work reliably in environments with 10% to 90% RH and temperatures from 0 ℃ to +45 ℃, matching common indoor conditions.

Q3: Does the YD-643 support diverse coercivity requirements?
A3: Yes, the 300 OE to 2750 OE reading/writing range allows it to adapt to different card types within a single device setup.

Q4: What specific signaling tells the staff that the write was successful?
A4: The unit employs a dual-hint system using both sound and light, ensuring the completion of the task is obvious to the senses.

Q5: Is it compatible with international standards for magnetic media?
A5: The device follows the ISO7811~7815 magnetic card standard, making it applicable for globally recognized membership and credential systems.